Foxconn M61PMX - Manual (Page 30)

3
23
Advanced BIOS Features
► Removable Device Priority
This option is used to select the priority for removable device.
► Hard Disk Boot Priority
This option is used to select the priority for HDD startup. After pressing , you can
select the HDD using the Up/Down arrow keys, and change the HDD priority using /
; you can exit this menu by pressing .
► CD-ROM Boot Priority
This option is used to select the priority for CD-ROM startup. After pressing , you can
select the CD-ROM using the / or Up/Down arrow keys, and change the
CD-ROM priority using <+> or <->; you can exit this menu by pressing .
► Quick Boot
While Enabled, this option allows BIOS to skip certain tests while booting, this will shorten
the time needed to boot the system
► First/Second/Third/Fourth Boot Device
These three options allow you to select the priority of boot sequence from different devices.
► Boot Up Floppy Seek
This item controls whether the BIOS will be checking for a floppy drive while booting up.If it
cannot detect one (either due to improper configuration or physical unavailability),it will appear
an error message.Disabling this function,then POST will not detect the Floppy.
► Boot Up Floppy Seek
This item defines if the keyboard Num Lock key is active when your system is started.The
available settings are: On (default) and Off.
► Password Check
When it is set to [Setup], a password is required to enter the BIOS setup; selet[Always], a
password is required not only to enter BIOS setup, but also on each boot of your PC.
► APIC Function
Phoenix - AwardBIOS CMOS Setup Utility
Advanced BIOS Features
► Removable Device Priority [Press Enter] Item Help
► Hard Disk Boot Priority [Press Enter]
► CD-ROM Boot Priority [Press Enter] Menu Level ►
Quick Boot [Enabled] Select Removable Boot
First Boot Device [Removable] Device Priorty
Second Boot Device [CDROM]
Third Boot Device [HDD]
Fourth Boot Device [Network]
Boot Up Floppy Seek [Disenabled]
Boot Up NumLock Status [On]
Password Check [Setup]
APIC Function Enabled
Logo Full screen [Enabled ]
Small Logo(EPA) Show [Enabled]
Summary Screen Show [Enabled]
Plug and play OS [Enabled]
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F7: Setup Defaults
Press Enter