Foxconn A79A-S - Manual (Page 49)

3
42
SuperIO Configuration
► OnBoard Floppy Controller
This item is used to enable/disable Floppy Controller.
► Serial Port1 Address
This item is used to assign the I/O address and interrupt request (IRQ) for the onboard serial
port 1.
► IR Function
This item is used to assign the I/O address and interrupt request (IRQ) for the IR port.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
SuperIO Configuration
OnBoard Floppy Controller [Enabled] Help Item
Serial Port1 Address [Enabled]
IR Function [Enabled] Allows BIOS to Enable
or Disable Floppy
controller.
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[Enabled]