Foxconn A79A-S - Manual (Page 44)

3
37
► Gen2 High Speed Mode
This item is used to select the Generation II speed mode of PCI Express slots. Select [Auto],
RC will only advertize Generation II capability; Select [Software Initiated], the speed mode
is determined by software initiated; Select [Advertised RC], the speed mode is determined
by hardware initiated; Select [Disabled], BIOS will turn off Generation II speed mode of PCI
Express slots.
► Gen2 De-Emphasis
This item is used to depress noises of PCI Express slots when working in Generation II Speci-
fication mode.
► Link ASPM
This item is used to select the link mode between ASPMs.
Nb-Sb Port features
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
PCIE 1X Port 1
Gen2 High Speed Mode Help Item
Gen2 De-Emphasis [-3.5dB]
Link ASPM [Disabled] “Auto” - RC only
advertize Gen2
capability.
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[Auto]