Foxconn A79A-S - Manual (Page 25)

2
18
■ Make sure the power supply is turned off before pressing the CLS_CMOS button to
clear CMOS.
■ Push down the CLS_CMOS button and hold it there for a couple of seconds to clear
the CMOS completely, then release.
CA
UT
IO
N
!
2-6 onboard button
Power on button: PoWeR_oN
Push the power on button to power on the system.
Reset button: ReSeT
Push the reset button to reboot the system.
Clear CMoS button: ClS_CMoS
Turn off the AC power supply, push the CLS_CMOS
button and hold there for a couple of seconds to clear
CMOS.
POWER_ON RESET CLS_CMOS
2-7 OnBoard Debug LED
2-digital LED readout displays hardware status and
enables quick error diagnosis.