Foxconn A79A-S - Manual (Page 36)

3
29
input a value directly from 0 to 3F.
► CPU DID Control
This item is used to control CPU Divisor ID. It may help to reduce the oprating frequency.
This item will appear only when your CPU is supporting this feature.
► CPUDID ID
This item alows you to adjust the DID ID manually. You can use [+]/[-] to change the value or
input a value directly from 0 to 7. The default value is 1.
Voltage Configuration
► Vcore Voltage Control
This option is used to change the CPU voltage in a step of 0.024V. The voltage can be incre-
mented from 0.024V to 0.6V.
► HT Voltage Control
This option is used to change the HT voltage in a step of 0.03V. The voltage can be incre-
mented from 1.10V to 1.55V.
► DIMM Voltage Control
This option is used to change the memory voltage. The voltage can be incremented from
1.744V to 2.640V.
► NB Voltage Control
This option is used to change the North Bridge voltage in a step of 0.045V. The voltage can be
incremented from 1.680V to 2.355V.
► CPU PLL Voltage Setting
This option is used to adjust CPU PLL(Phase Lock Loop) voltage. The default value is [2.49V].
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Voltage Configuration
Vcore Voltage Control [0 ] Help Item
HT Voltage Control [1.19 V]
DIMM Voltage Control [1.936 V] 0=>CPU default voltage
NB Voltage Control [1.815V ] stepping = 0.024V
CPU PLL Voltage Setting [2.49 V ] So current Vcore voltage
=default+value*0.024V
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
0