Foxconn A7DA Series - Manual (Page 9)

1
2
1-1 Product Specifications
CPU Support AMD socket AM2+ Phenom TM FX / Phenom TM series processors
Support AMD socket AM2 series processors :
Athlon TM 64X2 Dual-Core / Athlon TM X2 Dual-Core /
Athlon TM 64 / Sempron TM
HyperTransport 2000/1600MT/s for AM2 CPU
Up to 5200MT/s (HT3.0) for AM2+ CPU
Chipset North Bridge: AMD 790GX
South Bridge: AMD SB750
Memory 4 x 240-pin DDR2 DIMM sockets
Support up to 8GB of system memory
Dual channel DDR2 1066*/800/667/533MHz architecture
*DDR2 1066 is only supported by some AM2+ CPU
Integrated Memory 128MB DDR3 SidePort Memory (Only available in A7DA-S)
Audio Realtek 8-channel audio chip
High Definition Audio
2/4/5.1/7.1-channel
Support Jack-Sensing function
LAN Broadcom Gigabit LAN chip
Expansion Slots 2 x PCI Express x16 slots
2 x PCI Express x1 slots
2 x PCI slots
Onboard Serial ATA 5 x SATA connectors
1 x ESATA connector
300MB/s data transfer rate
Support hot plug and NCQ (Native Command Queuing )
USB Support hot plug
Support up to 12 x USB 2.0 ports (4 rear panel ports, 4 onboard USB
headers providing 8 extra ports)
Supports USB 2.0 protocol up to 480Mb/s
Internal Connectors 1 x 24-pin ATX main power connector
1 x 8-pin ATX 12V power connector
1 x Floppy disk drive connector
1 x IDE connector
5 x SATA connectors
1 x ESATA connector
4 x USB 2.0 connectors (supporting 8 x USB devices)
1 x CPU fan header (4-pin)
1 x System fan header (4-pin)
1 x NB fan header (4-pin)
1 x Front panel connector
1 x CD_IN connector
1 x Front Audio connector
1 x Chassis intrusion alarm header (INTR)