Foxconn 761GXK8MB-RS User Manual
Page 55
48
Chapter 3 BIOS Description
v
PS2MS Wakeup from S3/S4/S5
This option used to set which action will wake up PS/2 keyboard from S3/S4/
S5 status.The setting values are:Disabled,Click,Move&Click.
v
Power Up by Alarm
This option used to set the time of the start-up function.In order to use this
function,the start-up password function must be cancelled and the PC power
source must not be turned off.
v
Month Alarm
This option is used to set the timing for the start-up month.The setting valudes
contain 1-12 and NA.
v
Day of Month Alarm
This option is used to set the timing for the start-up month.The setting valudes
contain 0-31 .
v
Time
This option is used to set the timing for the start-up time.The setting valudes
contain hh:0-23;mm:0-59;ss:0-59.
v
Primary /Secondary IDE
When these items are enabled,the system will restart the power saving timeout
counters when any activity is detected on any of the drives or devices on the
primary or secondary IDE channels.
v
FDD.COM.LDT Port
When this option is enabled,the system will restart the power saving timeout
counters when any activity is detected on the floppy disk drive,serial ports,or
the parallel port.
v
PCI PIRQ[A-D]#
When this option is disabled,any PCI device set as the master will not power
on the system.
PDF 文件使用 "pdfFactory" 试用版本创建