Foxconn 761GXK8MB-RS User Manual
Page 20
13
Chapter 2 Installation Instructions
Memory
This motherboard includes
four 184-pin slots with 266/333/400 MHz Dual Chan-
nel DDR DRAM interface, You must install one memory module to ensure nor-
mal operation. If you install more than two modules, they must be the same
sp eed . Mixin g m emory m odu les fro m d ifferen t m anufactures are n ot
recommended.
For the latest memory modules support list, please visit the website:
http://www.foxconnchannel.com
Installation of DDR Memory
1. There is only one gap in the center of the DIMM slot, and the memory
module can be fixed in one direction only.
2. Align the memory module to the DIMM slot, and insert the module
vertically into the DIMM slot.
3. The plastic clips at both sides of the DIMM slot will lock automatically.
104 Pins
80 Pins
Note:
Be sure to unplug the AC power supply before adding or re-
moving expansion cards or other system peripherals, espe-
cially the memory devices, otherwise your motherboard or the
system memory might be seriously damaged.
DIMM1
DIMM2
DIMM3
DIMM4
PDF 文件使用 "pdfFactory" 试用版本创建