Foxconn 761GXK8MB-RS - Manual (Page 49)

42
Chapter 3 BIOS Description
v Onboard Parallel Port
This item allows you to determine onboard parallel port controller I/O address
and interrupt request( IRQ).
v Parallel Port Mode
This item is used to assign data transport protocols of parallel port.
v ECP Mode Use DMA
Select a DMA Channel for the parallel port when using the ECP mode. This
field is configured only if Parallel Port Mode is set to ECP.
v IDECH0/1/2/3 Access Interface
This option is used to set which display device will be used first when your
PC starts up.
v USB2.0 /MAC/Audio Access Interface
This item is used to set the USB2.0 /MAC/Audio Access interface.
PDF 文件使用 "pdfFactory" 试用版本创建 Æ Æ www.fineprint.com.cn