Foxconn 761GXK8MB-RS User Manual
Page 48
41
Chapter 3 BIOS Description
Integrated Peripherals
Integrated Peripherals Menu
v
SIS OnChip IDE Device
Press enter to set onchip IDE device.
v
SIS OnChip PCI Device
Press enter to set onchip PCI device.
v
IDE HDD Block Mode
This item is used to set whether the IDE HDD Block Mode is allowed.
v
Onboard FDC Controller
This item is used to set whether the onboard FDC controller is enabled.
v
Onboard Serial Port 1/2
These items are used to assign the I/O address and interrupt request(IRQ)
for the onboard serial port 1/2. These items cannot be adjusted.
v
UART Mode Select
Use this item to select the UART mode. Setting valus include Normal. IrDA,
ASKIR. The setting value is determined by the infrared module installed on
the board.
v
UR2 Duplex Mode
This item available when UART Mode Select is set to either ASKIR or IrDA. The
item enables you to determine the infrared function of the onboard infrared
chip.
PDF 文件使用 "pdfFactory" 试用版本创建