Foxconn NF4K8AC-RS - Manual (Page 48)

41
Chapter 3 BIOS Description
PnP/PCI Configurations
Init Display First (Default: PCI Slot)
This option is used to set which display device will be used first when your PC
starts up. The available setting values are: PCI Slot, PCIEx.
Reset Configuration Data (Default: Disabled)
This option is used to set whether the system is permitted to automatically
distribute IRQ DMA and I/O addresses each time the machine is turned on.
The setting values are: Disabled and Enabled.
Resources Controlled By (Default: Auto (ESCD))
This option is used to define the system resource control scheme. If all cards
you use support PnP, then select “Auto (ESCD)” and the BIOS will automati-
cally distribute interruption resources. If the ISA cards you installed do not
support PnP, you will need to select “Manual” and manually adjust interrup-
tion resources in the event of hardware conflicts. However, since this
motherboard has no ISA slot, this option does not apply.
IRQ Resources
Press the key, then manually set IRQ resources.
PCI/VGA Palette Snoop (Default: Disabled)
If you use a non-standard VGA card, use this option to solve graphic accelera-
tion card or MPEG audio card problems (e.g., colors not accurately displayed).
The setting values are: Disabled and Enabled.
Maximum Payload Size (Default:4096 )
Set maximum TLP payload size for the PCI express devices. The unit is byte.
PnP/PCI Configurations Menu