Foxconn 761GXK8MC-RS User Manual
Page 53
46
Chapter 3 BIOS Description
v
Power Up by Alarm
This option used to set the time of the start-up function. In order to use this
function, the start-up password function must be cancelled and the PC power
source must not be turned off.
v
Month Alarm
This option is used to set the timing for the start-up month. The setting valudes
contain 1-12 and NA.
v
Day of Month Alarm
This option is used to set the timing for the start-up month. The setting valudes
contain 0-31 .
v
Time
This option is used to set the timing for the start-up time. The setting valudes
contain hh:0-23;mm:0-59;ss:0-59.
v
Primary /Secondary IDE
When these items are enabled,the system will restart the power saving
timeout counters when any activity is detected on any of the drives or devices
on the primary or secondary IDE channels.
v
FDD.COM.LDT Port
When this option is enabled, the system will restart the power saving timeout
counters when any activity is detected on the floppy disk drive, serial ports, or
the parallel port.
v
PCI PIRQ[A-D]#
When this option is disabled, any PCI device set as the master will not power
on the system.
PDF created with pdfFactory Pro trial version