Foxconn 761GXK8MC-RS User Manual
Page 19
12
Chapter 2 Installation Instructions
Memory
This motherboard includes
two
184-pin slots with 266/333/400 MHz Single Chan-
nel DDR DRAM interface, You must install at least one memory module to en-
sure normal operation. If you install two modules, they must be the same speed.
Mixing memory modules from different manufactures are not recommended.
For the latest memory modules support list, please visit the website:
http://www.foxconnchannel.com
Installation of DDR Memory
1. There is only one gap in the center of the DIMM slot, and the memory
module can be fixed in one direction only.
2. Align the memory module to the DIMM slot, and insert the module
vertically into the DIMM slot.
3. The plastic clips at both sides of the DIMM slot will lock automatically.
104 Pins
80 Pins
Note:
Be sure to unplug the AC power supply before adding or re-
moving expansion cards or other system peripherals, espe-
cially the memory devices, otherwise your motherboard or the
system memory might be seriously damaged.
DIMM1
DIMM2
PDF created with pdfFactory Pro trial version