Foxconn 760GXK8MC RAID - Manual (Page 7)

Serial ATA RAID User’s Guide
Step 1. Hardware Setup
Hard disk drives setup
The South Bridge SiS964 SATA controller only supports two Serial ATA
hard drivers.
For RAID 0 (Striping array)
z Any of 2 SATA Hard disks would make a stripe system.
z The South Bridge SiS964 SATA controller only supports combination 6.
NOTE: Storage Capacity: the number of hard disk drives times the capacity
of the smallest drive in the disk array
Working Speed: the speed of the lowest drive in the disk array
For RAID 1 (Mirror array)
z Any of 2 SATA Hard disks would make a mirror system.
z The South Bridge SiS964 SATA controller only supports combination 6.
NOTE: Storage Capacity: the capacity of the smallest drive in the disk array
Working Speed: the speed of the lowest drive in the disk array
For JBOD (Spanning array)
z Any of 2 SATA Hard disks would combine to a JBOD system.
z The South Bridge SiS964 SATA controller only supports combination 6.
NOTE: Storage Capacity: the number of hard disk drives times the capacity
of the smallest drive in the disk array
Working Speed: the speed of the lowest drive in the disk array
4