Foxconn 760GXK8MC RAID - Manual (Page 31)

Serial ATA RAID User’s Guide
About Create Raid
Click the tab “Create Raid”, you can find three drop-down boxes and three
panes. Those meaning will be showing below.
Viewing the “Create Raid”
a) Raid Type: Click the drop-down box “Raid Type”. This box enables the
user to select array type. There are three array types that the user can
select: JBOD, RAID 0 (Stripe) and RAID 1 (Mirror). User can select any
one array type to create a RAID set.
b) Block Size: If user selected RAID 0 array type in the “Array Type” box,
the “Block Size” drop-down box will be enabled and user must select a
block size. Clicking the drop-down box “Block Size”, there are seven
block sizes that the user can select: 8k, 16k, 32k, 64K, 128K, 256K and
512K. User can select any one block size to create a RAID 0 set. The
default selection is 64K.
28