Foxconn 760GXK8MC RAID - Manual (Page 22)

Serial ATA RAID User’s Guide
3. You will have two selections to create a JBOD array. The default value
is <1>. If you select <1>Auto Create, you can create a JBOD array
faster and easier. The result after creating will be shown on step 5.
Besides, you also can select <2>Manual Create, see following steps.
4. Use<↑> <↓> to select disk , and press to select disk, to
exit. When you press on the disk you wanted, the RAID Type
will be changed from Single to JBOD.
19