Foxconn 760GXK8MC RAID - Manual (Page 37)

Serial ATA RAID User’s Guide
: Show the remaining splitting data
sector numbers.
NOTE: miniCapacity x N > SourceCapacity
miniCapacity: The minimum size of all selected disks.
SourceCapacity: The size of source disk.
N: Total disk numbers.
6. Next, you can click “OK” button to continue after the operation being
selected. The differential warning messages will be popup following
the differential operations. If the operation is “Create Only”, the
warning messages are similar to JBOD array creation.
7. If the operation is “Source is NOT a boot device” of
into Raid0 Set>, the following warning message will be popup, seeing
below:
Next, you can click “Yes” button to start the operation or click “No” button
to cancel. When you click “Yes” button to start this operation, the following
warning message will be popup.
34