Foxconn NF4K8AB-8EKRS - Manual (Page 62)

54
Chapter 5 NVIDIA RAID Introduction
NF4K8AB Series User Manual
Setting Up the BIOS
1. Start up the computer, then press Delete to enter the BIOS setup. Use the arrow
keys to select Integrated Peripherals, then press Enter.
2. Use the arrow keys to select the RAID Config, then press Enter.
3. From the RAID Config window, enabled the RAID Enable, the other items would
be light, then you can enable the disk that you want to use as RAID disks.
4. Press F10 to save the configuration and exit.