Formax FD 382 / FD 38X - Manual (Page 9)

OPERATION
1. Place power switch in the ON / “O” position.
2. Extend the catch tray as required.
3. FD 382 ONLY: Move the stacker wheels to the proper
position for the paper size (Fig. 6) (Refer to chart on
page 8). Stacker wheels will automatically adjust on
the FD 38X.
4. Set the self-centring paper side guides for the width of
the paper and lock in position using thumbscrews.
5. Adjust in-feed tray tension lever (Fig 7) for different
paper weights. Move the lever up towards the “-”
symbol for lighter paper and down toward the “+”
symbol for heavier paper. The middle position is for
standard paper weights.
6. Raise the in-feed tray lever to lower the in-feed tray.
7. Neatly stack paper on the in-feed tray.
8. Lower the in-feed tray lever to raise the in-feed tray.
Fig. 6
5
Tension Lever
Fig.7
Self centering side guides
Fig.7
Stacker Wheels
Stacker Wheel Positions A, B & C