Formax FD 382 / FD 38X - Manual (Page 15)

FD 38X CUSTOM FOLDS SETUP
1. Select the custom fold number you want to program
using the “
” buttons. Press the “ ” button to
enter number and advance to the next screen.
2. The current settings for the custom fold and stacker
position will be displayed. Press the “ ” button to edit
the settings or the “
” to go back and select a different
custom fold number.
Note: All custom folds are pre-set for a standard 11”
C-fold.
3. Adjust Fold Table screen will be displayed. Use the
“
” buttons to change the upper fold table setting.
Press the “ ” button to enter and advance to the lower
fold table setting. Adjust the lower fold table and press
the “ ” button to enter and advance to Stacker Position
screen.
The FD 38X has 35 custom fold settings that can be stored
into memory for recurring jobs with fold settings that vary from
the standard fold settings. To create or edit custom folds se-
lect “Custom Folds Setup” from the Program Menu screen and
press the “ ” button to enter. See page 13 to help determine
the new fold measurements.
11