Fluke Biomedical DALE601 User Manual

Page 18

DALE601/601E

Operators Manual

1-8

TEST POI

EXTER

601

AAMI

CHASSIS

fcu02.eps

Figure 1-2. Analyzer Top Panel Components and Controls

Table 1-2. Components and Controls of the Analyzer

Label Name

Function

Power Cord

Supplies power to the Analyzer and to the DUT.
The measurement circuits are energized when
the power cord is plugged into an outlet. There is
no on/off switch.

Test Receptacle Supplies power to the DUT: DALE601, 15 A at

125 V

or DALE601, 20A at 125V;

and

DALE601E, 10 A at 230 V.

Outlet
Indicators
(DALE601 only)

Verifies the polarity and wiring of the outlet to
which the Analyzer is connected. Only correctly
wired outlets should be used. Not applicable to
isolated systems.

Outlet Switch

With the center OFF position, permits testing
with both the NORMAL (forward) and
REVERSED polarity of the line. It is
recommended that the switch is paused in the
center OFF position before changing polarity.

This manual is related to the following products:

DALE601E