Fluke Biomedical SPOT Light - Manual (Page 22)

SPOT Light
Users Manual
10
Maintenance
The Product is an SpO2 functional tester. Try to prevent
mechanical abuse that could change the test values. The
Product has no internal user-serviceable parts.
W Warning
For safe operation and maintenance of the
Product and to prevent personal injury:
• Repair the Product before use if the
battery leaks.
• Remove batteries to prevent battery
leakage and damage to the Product if it
is not used for an extended period.
• Connect the battery charger to the mains
power outlet before the Product.
• Use only Fluke approved power adapters
to charge the battery.
• Do not short the battery terminals
together.
• Do not keep cells or batteries in a
container where the terminals can be
shorted.
• Keep cells and battery packs clean and
dry. Clean dirty connectors with a dry,
clean cloth.
• Batteries contain hazardous chemicals
that can cause burns or explode. If
exposure to chemicals occurs, clean
with water and get medical aid.
• Do not put battery cells and battery
packs near heat or fire. Do not put in
sunlight.
• Do not disassemble or crush battery
cells and battery packs.
• Have an approved technician repair the
Product.
• Use only specified replacement parts.
• Remove the input signals before you
clean the Product.
• Connect factory supplied three-
conductor mains power cord to a
grounded power outlet.
• Do not use a two-conductor adapter or
extension cord.