Fluke Biomedical SPOT Light - Manual (Page 18)

SPOT Light
Users Manual
6
How to Turn On the Product
Push  for one second to turn on the Product. The
screen shown in Figure 2 is the power-up screen. Push

and hold for 3 seconds to turn off the Product.
gvh001.eps
Figure 2. Power-Up Screen
Note
Firmware version shown is for illustration only.
The version shown on your Product could be
different.
When the self test is complete and no errors are sensed,
the screen shown in Figure 3 shows in the display.
gvh004.jpg
Figure 3. Main Screen
How to Use the Product
All Product tests are set through the controls on the main
screen. As each parameter is set, the test value changes
immediately.
SpO2 Sensor Placement
Put the SpO2 sensor on the artificial finger as shown in
Figure 4.