Fluke Biomedical INCU Incubator Analyzer - Manual (Page 51)

Incubator Analyzer
Software Options
4-13
Zoom
The Zoom menu screen is shown in Figures 4-15 and 4-16. The Zoom
command is only applicable when a graph is displayed.
Figure 4-15. INCU Zoom menu screen
The Zoom menu applies only to the last graph activated. It consists of two
elements:
1. Zoom X for the horizontal axis (x-coordinate: real-time scale on
graphs)
2. Zoom Y for the vertical axis (y-coordinate).
Zoom X
Figure 4-16. INCU Zoom on window screen
This command is active when a graph is displayed. It allows for inspection of
a small interval of the total acquisition time. Maximum zoom is equal to 30
times the sample interval. When you close a graph, the zoom x menu
becomes inactive.
Zoom Y
This is an optional command. It is used to define the Y-axis of the graph
between the minimum value and the maximum value of the parameter at the
time under observation.
If you wish to use the Zoom feature on an inactive graph, open the graph
again through the Graph menu.