Fluke Biomedical INCU Incubator Analyzer - Manual (Page 33)

Incubator Analyzer
INCU Setup
3-7
Air Flow Sensor: The Air Flow Sensor is detachable; however, it must be
inserted to perform measurements. An error "fault sensor" will be displaced
if not inserted or if the Hot Wire is broken in the sensor. The INCU will not
perform airflow measurements in this condition.
The Air Flow Sensor (Figure 3-5) rotates 360 degrees. For best results,
position the Air Flow Sensor perpendicular to the airflow within the
incubator. Incubators utilize different airflow patterns; thus, the user needs to
be familiar with the particular airflow pattern utilized by the incubator under
test to properly position the Air Flow Sensor.
Warning! Do not use in the presence of oxygen! The Air
Flow Sensor should not be used in an oxygen-enriched
environment. The Air Flow Sensor utilizes a hot-wire technique,
which can be a source of ignition.
Figure 3-5. Placement of Air Flow Sensor