Fluke Biomedical 07-494 - Manual (Page 9)

2
Getting Started
Receiving Inspection
2-1
Section 2
Getting Started
2.1 Receiving Inspection
Upon receipt of the instrument:
1. Inspect the carton(s) and contents for damage. If damage is evident, file a claim with the carrier and
contact Fluke Biomedical, Radiation Management Services at 440.248.9300.
2. Remove the contents from the packing material.
3. Verify that all items listed on the packing list have been received and are in good condition. The
following items are shipped with the Model 07-494 kVp Meter
a. Part No.168005, Model 07-494 kVp III.
b. Part No.16-29, 9 V Alkaline Battery
c. Part No.168001 Instruction Manual
d. Part No. 010023 Registration Card
NOTE
If any of the listed items are missing or damaged,
notify Fluke Biomedical at 440.248.9300.
2.2 Storage
If necessary to store the kVp meter prior to use, pack it in the original container if possible. Be sure the
storage area is free of corrosive materials, vibrations, and fluctuations in temperature and humidity. Also
be sure the environmental specifications (refer to Section 1-2, Specifications) are not exceeded.
2.3 Routine Cleaning
CAUTION
Do not immerse the Model 07-494 Wide-Range
Digital kVp Meter. This unit is not waterproof. Liquid
could damage the circuits. The unit should be kept
clean and free of dirt and contamination. The unit
may be cleaned by wiping with a damp cloth using
any commercially available cleaning or
decontaminating agent.