Flowserve Limitorque MX DeviceNet Field Unit - Manual (Page 40)

Limitorque MX DeviceNet Field Unit FCD LMENIM2328-00 – 11/05
40
Always place the component or board into an anti-static protective bag for transportation or storage. •
Transport all static-sensitive components only in static-shielding carriers or packages. Place static •
awareness labels on all components to prevent removal from static-shielding container during transit.
Handle all static-sensitive components at a static-safe work area including floor mat, wrist strap, air
•
ionizer, ground cord, and conductive table mat.
Do not subject components to sliding movements over any surface, at any time.
•
8 How to Order Parts
To order parts or obtain further information about your Limitorque DeviceNet field unit, contact your
local Limitorque distributor sales office, or:
Flowserve Corporation Flow Control
Limitorque Actuation Systems
5114 Woodall Road
P.O. Box 11318 Lynchburg, VA 24506-1318
Phone (434) 528-4400
Fax (434) 845-9736
To find the Limitorque distributor or sales office near you, go to http://www.limitorque.com
All inquiries or orders must be accompanied by the following information supplied on the actuator
nameplate:
Unit size •
Order number •
Serial number •
9 Regulatory Information
The Flowserve Limitorque DeviceNet board has been tested in accordance with the listed specifications
and complies with European Directive 89/336 EC, EMC Directive and 73/23 EC, Low Voltage Directive;
EN 55011:1998 + A2:2001
EN 61000-6-2:2001