Flowserve StarPac 3 User Manual
Page 12
StarPac Intelligent Control System FCD VLENIM0066-05 04/14
12
®
Table V: Physical Specifications
Housing Material
powder painted aluminum stainless steel
Soft Goods
Buna-N
Weight
10.3 pounds ( kg) aluminum 26.5 pounds ( kg) stain-
less steel
Pressure Sensor
316 L stainless steel
Pressure Sensor Over-range Two times maximum operating pressure with negligible change in output
Pressure Sensor Seals
Viton, Kalrez, EPDM O-rings PTFE, Spiral Wound Gaskets
Tubing
316 stainless steel with Swagelok® fittings
Table VI: Positioner Specifications
Deadband
<0.1% full scale
Repeatability
<0.05% full scale
Linearity
<0.5% (rotary), <0.8 (sliding stem) full scale
Air Consumption
<0.3 SCFM (0.5 Nm3/hr) @ 60 psi (4 barg)
Table VII: Measurement Repeatability
Flow
0.25% full scale
Pressure (max.)
0.1% full scale
Temperature
1° C body temperature measured by Type K thermocouple
Drift
1% full scale / 6 months
Calibration
Independent zero and span adjustment for all sensors
Table VIII: Hazardous Area Certifications
Explosionproof / Flameproof
Nonincendive/Div 2
Class I, Div 1, Groups B,C,D
Class II, Div 1, Groups E,F,G
Class III
With Non-Incendive Outputs
T6 Max ambient 75
0
C
Class I, Div 2, Groups A,B,C,D
Zone 2, Ex nIIC
FM
APPROVED