EXCALIBUR 410-V Talking E-Chess - Manual (Page 26)

26
A
d
vanc
ed Ches
s
F
unc
tions
piece you want to change to. Press OPTIONS/MOVE
to confirm. Press CLEAR/ON to resume the game.
%NGCTKPI"VJG"$QCTF12NCEKPI"2KGEGU
You can clear all pieces from the chessboard then
select and set pieces where you want them.
±
1. Press SHIFT .
CEZ;( CEZ;( CEZ;( CEZ;(
appears.
2. Repeatedly press OPTIONS/MOVE then
repeatedly press NEXT MOVE until
9Bh8h 9Bh8h 9Bh8h 9Bh8h
(clear
board) appears. The board is cleared of all
pieces.
3. Press SETUP +/HINT or SETUP –/LEVEL .
I[jKF I[jKF I[jKF I[jKF
appears and a white king flashes.
4. Repeatedly press NEXT MOVE , LAST MOVE ,
NEXT PIECE , and LAST PIECE to move the
piece to the square you want.
5. Repeatedly press SETUP +/HINT or SETUP –/
LEVEL to select the piece you want to place.
6. If necessary, repeatedly press /UNDO to
change the color of the piece you want to
place, then press
OPTIONS/MOVE to confirm
the piece.
7. Press NEXT MOVE , LAST MOVE , NEXT PIECE ,
or LAST PIECE. Another piece appears.
8. Repeat Steps 4–7 to add additional pieces to
the board.
9. Once you have placed all the pieces you want,
press CLEAR/ON to start the game.
To change the color of the side to move, press
SHIFT , then either SETUP button, then press /
UNDO to change the side to move, then press
CLEAR/ON to continue.
±
±
"016'"
±
"
• The computer sounds an
error beep if it detects
any illegal settings.
• You cannot exit this
mode unless there is a
white king and a black
king on the board.
60-2846.fm Page 26 Wednesday, July 3, 2002 5:07 PM