Exacq Enterprise System Manager User Manual User Manual
Page 28
www.e
x
acq.com
Page 28 of 37
6/9/2015
The following events can be monitored. For information about selecting which events to monitor, see the
“Organization” section of this manual.
Camera Events
Definition
Video Loss
Analog or IP video signal lost.
Video Motion
Camera has detected motion.
Camera Disconnected
Network cannot connect to analog or IP camera.
Server Events
Definition
Archive Alarm
Failure on archiving target, such as bad mount point.
Archive Task Alarm
Archive task failed.
Button Press
Button input on server pressed.
Content Age Alarm*
Video deleted before configured retention period. For example, the server
is configured to retain video for 30 days, but the server does not have
enough space to store that much video.*
Core Throttling
Server load requires that video frames be discarded to compensate.
DVR Board Failure
Capture card malfunctioned.
DVR Board Temperature
Capture card temperature not within recommended range.
Fan Alarm
Fan has failed on capture board
Fanspeed sensor alarm
System fan not operating at recommended speed.
Input Trigger
Discrete input on a hybrid server (or IP camera with alarm input) activated.
Login Failure
Login attempt failed on server.
Power Supply Alarm
Alarm on a server with redundant power supply.
Server Disconnected
Connection to server lost.
Server License Error
Invalid license on server.
Server License Warning
License will expire in less than 30 days.
Soft Trigger
Signal sent from Client to server.
Storage Alarm
Drive capacity threshold reached.
Storage Hardware Alarm
Server storage malfunctioned.
Temperature Sensor Alarm
System temperature not within recommended range.
Update Downloading
Software update download in progress.
Update Failure
Server software update failed.
Update Installing
Server software update installing.
Update Pending
Server restarting after software update.
Update Success
Server software update completed.
Voltage Sensor Alarm
System voltage not in recommended range.
*When a new system starts recording video for the first time, a content age alarm will not be triggered even
though the age of the oldest recorded video is lower than the desired oldest content. This event cannot be
triggered until the system automatically deletes data when the storage capacity is filled earlier than desired.
For information about troubleshooting Content Age Alarm events, see