ETA Multiplo User Manual
Page 22

22
GB
II. FEATURES OF THE DEVICE AND ACCESSORIES (pic. 1)
The basic version of the
ETA 1088 mixer comprises of propulsion unit, whisks, kneading
hooks, immersion blender, mixing utensil, spatula and side rack for accessories. The
ETA
2088 and ETA 3088 version is equipped with a light and is extended by a stand with a
rotary bowl and a lid. The
ETA 3088 has scale built in the stand.
A – propulsion unit
A1 – speed selector
A2 – TURBO button
A3 – release button
A4 – openings to connect accessories (E, F)
A5 – integrated light
A6 – sliding cover of the blender drive
A7 – foldable stand/holder
A8– supply cord
B - stand
B1 – fold-out bracket
B2 – bracket fastener button
B3 – mixer fastener button
B4 – fastening segment for spatula
B5 – inbuilt scale control panel
C – lid
C1 – feeding opening lid
D – rotary bowl
E – whisks
F – kneading hooks
G – immersion blender
H – mixing utensil
I – antiskid pad/lid
J – removable special spatula
K – side rack
L – spatula
III. PREPARATION FOR USE (pic. 1, 2)
Remove all packaging material and remove the mixer with accessories. Remove all
adhesive foils, stickers or paper from the appliance. Wash all parts which will come in
touch with food in hot water with soap, rinse them thoroughly with clean water and wipe dry
or let dry before first use.
Use of the individual levels (A1, A2)
0 – off
1 to 4 – speed selection (use for whisking, mixing, kneading)
– position of the switch only for mixing (turn the submersible blender on by
pressing the
TURBO button)
TURBO button –
the motor is running at max. power the whole time the button
A2 is pressed
– may be use at any speed level except
0.