ETA Digi Viento - Manual (Page 30)

Problem Cause Solution
Flakes and other
impurities are
peeled off the
ironing plate
Contrary to recommendation
undiluted water is used with
excessive hardness >15 °N
Use water diluted with distilled water
Clean the iron using the SELF CLEAN
function and steam shock
Brown liquid is
pouring out of the
ironing plate
Improper chemical agents were
used for removing scale
Do not add any chemical agents into
the water container for removing scale
You use one of the types of water
that we do not recommend
Use only common clean drinking water
for filling in the container, or water
diluted with distilled water
Fibers from linen got into the
holes in the ironing plate and they
are burning there
Clean the iron using the SELF CLEAN
function and the steam shock, or
vacuum the cooled plate delicately
from time to time
The ironing plate
is dirty or it has
brownish colour
High temperature is set Set the program/temperature by the
control H that corresponds to the
ironed material so that the material is
not burned on the ironing plate
Laundry is not sufficiently rinsed
and it contains residues of
washing powder, softener or
starch
Clean the ironing plate (see
Maintenance).
Rinse the laundry properly.
The ironing
plate surface is
scratched
The plate was in contact with
sharp and hard objects while
ironing
During ironing, avoid contact with
metal objects containing sharp edges
and do not put the iron on a metal
base with sharp edges and protrusions
VI. ENVIRONMENTAL PROTECTION
If the dimensions allow, there are labels of materials used for production of packing,
components and accessories as well as their recycling on all parts of the appliance The
symbols specified on the product or in the accompanying documentation mean that the
used electrical or electronic products must not be disposed of together with municipal
waste. For proper disposal, hand them over at the special collection places where they will
be accepted free of charge. Suitable disposal of the product can help to maintain
valuable natural resources and to prevent possible negative impacts on the environment
and human health, which could be the possible consequences of improper waste disposal.
Ask for more details at the local authorities or at a collection site. Fines can be imposed for
improper disposal of this type of waste in agreement with the national regulations.
If the appliance is to be put out of operation for good, after disconnecting it from power
supply we recommend cutting off the power cord and in this way it will not be possible to
use the appliance again.
More extensive maintenance or maintenance requiring intervention in the inner parts
of the appliance must be carried out by professional service!
Failure to comply with the instructions of the manufacturer will lead to expiration of
the right to guarantee repair!
30
GB
/ 74