Denon DN-HS5500 - Manual (Page 24)

19
ENGLISH
ENGLISH
t When the TAP button is pushed again, the
BPM manual input mode is saved and the BPM
is locked to that value.
MANUAL INPUT
The known BPM can be dialed in directly by the
numerical value.
e The BPM manual input mode
is available when the TAP
button is pushed for more
than 2 sec. “Manual In” is
displayed is the screen.
r You can input BPM value
directly with the EFFECTS
knob.
✽When you push and turn
the EFFECTS knob, you
may also adjust the “.1”
area.
12 AUTO BPM COUNTER/EFFECTOR
AUTO BPM COUNTER
DECK1:ORANGE
DECK2:GREEN
NEXT FILE B
LOCK
AUTO/INPUT BPM
FAST SEARTCH
MEMO PRESET
DECK1/2
HOT LIST ADD OMIT MIRROR
q,w,e,t
r
1
BPM LOCK
The data measured by the Auto
BPM counter is locked.
q Push the TAP button once
while Auto BPM counter is
operating.
“BPM Lock” is displayed for 1 second.
3
LOCK
NOTE:
• AUTO BPM COUNTER might not be able to be measured correctly according to the music.
*If this happens, please use the TAP or Manual In feature.
AUTO BPM COUNTER
Beats per minute (BPM) of a file is measured automatically and displayed during playback or in Cue standby mode.
Measured BPM values are synchronized with the effector parameters such as: (ECHO/LOOP and FLANGER time)
• When Auto BPM counter is off, pushing the TAP button for 1 second, reactivates the AUTO BPM COUNTER to
turn back on.
• If you change or select a new file, the old BPM is cleared and the Auto BPM counter starts to detect the new file
automatically.
NOTE:
• If the MP3 or WAV file contains metadata BPM
information, this value is displayed as the default
value and the LOCK icon will appear in the screen.
You may override the default TAG by
AUTO/TAP/MANUAL in as described above.
2
TAPPING
The interval when the TAP button
is pushed repeatedly is measured
and BPM is calculated accordingly.
w When you push the TAP
button, the Auto BPM counter turns off.
Push the TAP button repeatedly about 5 ~ 10
times according to the beat.
3
Select the LOOP mode
When the feedback level is set to the maximum,
loop playback with the specified time begins. File
can be search for and the file/Playlist can be
replaced during loop playback by pressing the Cue
button at this point.
ECHO LOOP FADE OUT
• The parameter mode is turned off while the
echo loop is reproducing when the back cue
or NEXT FILE is selected at the parameter
selection mode.
• When the new track is selected and playback
is started, echo loop playback stops by fade
out. An echo loop playback and a normal
playback can be smoothly replaced.
Set the parameters
w In the parameter selection
mode, the “ECHO/LOOP”
and “PARAMETERS”
indicator flashes and the
echo/loop parameters can be selected with
PARAMETERS knob and EFFECTS Knob.
Echo Feedback level : EFFECTS knob
Echo Delay time : PARAMETERS knob
ECHO/LOOP ON
q When the ECHO/LOOP button is
pressed, the echo/loop function
is turned on and the parameter
selection mode is set.
*When echo/loop indicator is solid (not
blinking), press the ECHO/LOOP button to set
the parameter selection mode again.
DECK1:ORANGE
DECK2:GREEN
NEXT FILE B
LOCK
AUTO/INPUT BPM
FAST SEARTCH
MEMO PRESET
DECK1/2
HOT LIST ADD OMIT MIRROR
q,w,r,!3,!6
t,i
e,y,!4,!5
o,!2
w,e,y,u,!0,!1,!4,!5
1 -1
1 -3
1 -2
One of the four effects can be selected.
ECHO/LOOP
EFFECTOR
LOCK
LOCK