Denon DN-HS5500 - Manual (Page 14)

9
ENGLISH
ENGLISH
5 TURNING ON THE POWER
q Press the power button.
The display below appears.
• Operation of the device set in the presettings starts.
• If Power On Play is turned on, the playlist selected at “Power On Play” in the presettings is launched.
w If the device selected above is not connected, select the device using the procedure shown below.
• Press the DEVICE button.
The device selection screen appears.
Turn the PARAMETERS knob or scratch disc to select the device.
Press the PARAMETERS knob to set the selected device.
@7 @6
@5
Full display mode
@5 Text display
• The file name, artist name and album name for the
file at which the cursor is set are displayed here.
• The title name is displayed in the text display
section when the cursor is set to a file name, and
the file name is displayed when the cursor is set to
a title name.
@6 D-SYNC mode indicator
• This is displayed when in the D-SYNC mode.
The D-SYNC indicator will only come on when two
DN-HS5500 are connected together by a RJ45
cable.
@7 Playing deck indicators
• These indicate the deck for which the panel
buttons will operate.