ESI Waveterminal 192L - Manual (Page 22)

ESI Waveterminal 192
23
Waveterminal 192L’s MIC input port use traditional Balanced cable. As below picture,
the plug to Waveterminal 192L is TRS 55 phone plug. The plug to Microphone is XLR.
.
Waveterminal 192L’s output port use Y cable(stereo
↔mono x 2).
As below picture, the plug to Waveterminal 192L is TRS 55 stereo phone plug. The plug
to external mixer or other devices is 2 x TRS mono phone plug.
Tip of Stereo cable connect to Left white plug and Ring of stereo cable connect to Right
red plug. Sleeve connects to Ground of both sides.