ESI Waveterminal 2496 - Manual (Page 33)

34
7. Select the "General" tab.
- Choose "Audio Driver Bit Depth = 24."
- Sample rate = 44100
NOTE: If you want to choose another sample rate,
the Control Desk should be selected first,
otherwise an error message will appear.
8. Press the "Wave Profile" button.
9. Exit Sonar to store your new configuration.
10. Start Sonar again.
11. To perform Live Monitoring at 1.5 ms with Sonar, Exit Sonar to change the latency.
Set "Latency" = 64 samples from the ‘Control Desk,’ then start Sonar again.
Set "Buffers in playback" = 2.
Set "Buffer size" slider to the left end (fast).
Press "Wave Profiler."
12. Please don't select “Share Drivers With Other Programs."