ESI Waveterminal 2496 - Manual (Page 30)

31
6. Working with Applications
GIGA STUDIO
GigaStudio 160 V.2.2 or higher
Note: You cannot use GigaSampler v1.6 with the Waveterminal 2496 EWDM driver.
If you want to use GigaSampler v1.6, you have to use the Waveterminal 2496 driver V.2.4.
1. Install GigaStudio.
2. Download GigaStudio v2.2 and update.
[ http://www.nemesysmusic.com/products/versions.html ]
3. Launch GigaStudio and set up the Waveterminal 2496 GSIF.
-Choose Setting
-Choose Hardware/Routing
-Choose ‘Waveterminal 2496 GSIF’
-In ‘Outputs Enabled’ choose the output port you want ( 1,2 3,4 ).
4. In ‘Midi In Ports,’ Choose the midi input port that you want to use with the GigaStudio
output port.
5. You can set up the GigaStudio Instrument audio output port in ‘Input’ of ‘DSP Station.’