ESI Prodigy X-Fi NRG - Manual (Page 8)

ESI Prodigy X-Fi NRG
8
Removing the slot faceplate
Insert the Prodigy X-Fi NRG card into the PCIe slot, firmly pushing the card into the slot until it is
seated securely. Replace the screw, and tighten.
Prodigy X-Fi NRG Installed in a PCIe 1x slot, next to two standard PCI slots
Once finished, close the computer case.
5. Software Installation
Before you are installing the software and driver for Prodigy X-Fi NRG, you should make sure to
have the latest chipset drivers installed for your mainboard and Windows version. You can usually
find those drivers on the website of the manufacturer of your computer and / or the motherboard of
your PC.
Also it might be better in most cases to disable any unused onboard devices in BIOS of your
computer (i.e. the onboard soundcard if you intend to no longer use it after installing Prodigy X-Fi
NRG). If you are unsure about this, you might want to ask a computer specialist for help.