equinux VPN Tracker 5.4.4 - Manual (Page 37)

‣ Expand the connection list by clicking the expansion button
‣ Click the “Log” tab
‣ Switch the log level to a higher level
VPN Environment Manager
In some cases, the local router will not handle VPN traffic
correctly. The VPN Environment Manager analyzes the VPN
capabilities of your router, and stores the results. Based on
these results, VPN Tracker will pick the right communication
method when connecting through this router.
To test the router, please do the following:
‣ Select “Help > VPN Environment Manager...”
‣ Click “Continue”
VPN Tracker now contacts a VPN gateway at equinux and tries
to establish a connection. It conducts three different tests to
check whether the local router supports IPSec Passthrough
and/or two variants of NAT-Traversal.
Note The VPN Environment Manager needs to run only
once for each router (network environment).
‣ If all goes well, you will see three green checkmarks stating
that your router is fully compatible with IPSec. The downside
is that any problem you experienced is caused by something
else
‣ If the local router does not support IPSec Passthrough or
NAT-Traversal, you probably need to change your VPN
Tracker and/or gateway configuration
37