Eizo DuraVision FDU2101 / FDU2101T 取扱説明書 - Manual (Page 16)

4
Package Contents
Check that all the following items are included in the packaging box. If any items are missing or damaged, contact
your local dealer.
Note
• Please keep the packaging box and materials for future movement or transport of the monitor.
• Monitor
• Power Cord (2-prong adapter) (Dedicated for 100 V AC)
• Analog signal cable : MD-C87
• RS-232C cable (for FDU2101T only)
• EIZO LCD Utility Disk (CD-ROM)
• Setup Manual (this manual)
• “For Users of Touch Panel LCD Monitor”
(for FDU2101T only)
• Clamper
Controls and Functions
7
11 10
8 9 1 2 3 4 5 6
Adjustment menu *
Example: FDU2101T
1. Auto EcoView sensor Detects ambient brightness. Auto EcoView function.
2. (RETURN) button Cancels the setting/adjustment and exits the Adjustment menu.
3. (UP) (DOWN)
button
• Chooses and increases/decreases adjustment settings for advanced adjustment
using the Adjustment menu.
• Pressing or directly allows you to adjust the brightness.
4. (ENTER / MENU)
button
Displays the Adjustment menu, determines an item on the menu screen, and saves
values adjusted.
5. (POWER) button Turns the power on or off.
(Press for 2 seconds or more to turn off the power.)
6. Power indicator Indicates the monitor’s operation status.
Green: Operating Orange: Power saving mode OFF: Power off
7. Power connector Connects the power cord.
8. RS-232C port
(for FDU2101T only)
Connects a PC and monitor via a RS-232C cable when this product is used as a touch
panel monitor.
9. Input signal connector Left: D-Sub mini 15-pin connector / Right: DVI-D connector
10. Power plug fall
prevention bracket
Fixes the power plug.
11. Cable holder Secures the power cord.
* For instructions for use, refer to the User’s Manual on the CD-ROM.