Dimplex BF39STP/DXP - Manual (Page 25)

25
WARNING:
Ensure wires do not come in contact with moving parts by securing wires in
tie wraps.
BF39ST, BF39DX, BF45ST, BF45DX
If the fireplace was operating prior to servicing allow at least 10 minutes for light bulbs
and heating elements to cool off to avoid accidental burning of skin.
Disconnect circuit power before attempting any maintenance or cleaning to reduce the
risk of electric shock or damage to persons.
TO REPLACE TEMPERATURE LIMIT SWITCH
(UNIT IS PERMENANTLY INSTALLED IN WALL)
NOTE:
To replace the log set re-connect the logset LED wire harness to the unit, insert
the front edge, pushing back down until the rear tab snaps under the back ledge and the
logs are resting against the mirror.