DR Power Powerwolf Power Wagon - Manual (Page 15)

DR

Powerwolf

Safety & Operating Instructions 9
Adding Oil and Gasoline
The DR Powerwolf is shipped with the engine oil already added, but check the oil level
before starting the engine for the first time – just in case.
Important! To get an accurate reading when checking the oil level:
⇒ The machine should be on a level surface.
⇒ The dipstick should be screwed down on Briggs & Stratton engines.
Engine Oil Capacity
Briggs & Stratton Intek 48 oz. (1.42 L)
Tip: To avoid confusion, we recommend leaving the caps on the fuel and oil fills until you
are ready to pour either gasoline or oil into the correct fill.
Use only SAE 30 high detergent oil. Other types of oil could cause problems operating
your machine. Please refer to your engine owner’s manual for detailed oil information.
1. Place the machine on a level
surface.
2. Check the dipstick and add SAE
30 high detergent oil, as required,
rechecking the dipstick until the oil
reaches the fill mark. Be careful
not to overfill. (Figure 2)
3. Fill the gas tank to within ¼
inch of the top with fresh,
unleaded gas. See your engine
owner’s manual for more
information.
Figure 2: Oil Fill and Drain
Transmission Oil
The transmission is permanently lubricated and sealed. The transmission's hydraulic oil
does not need to be checked or changed.
Oil Drain
Oil Fill