Specifications – DR Power Dual Action 3 pt. Hitch Model (Aug 2011 - Present) User Manual
Page 7
CONTACT US AT www.DRpower.com 7
Specifications
Engine
Tractor dependant
Tractor Requirements
Category 1 with hydraulic couplings, 2500 PSI recommended
Bed height
Tractor dependant, 3 PT hitch range
Wedge
6.61" (168mm) H, .75" (19mm) W, high carbon steel.
Log Trays
27.45in (697mm) L x 11.45in (290mm) W
Force/Tonnage
Up to 13 Tons (Tractor dependant)
Log Length
20 inches
Log Diameter*
24 inches
Cycle Time
Approx. 6 seconds (Tractor dependant)
Weight
232 lbs (105kg)
Dimensions
50"L X 31.5"W X 28"H
Cylinder Size
3" (76mm) Bore, 18.51" (470mm) Stroke
Control Valve
Integrated Pressure Relief
*The diameter of the log is indicative - a small log can be difficult to split when it contains knots or a particularly tough fiber. On
the other hand, it may not be difficult to split logs with regular fibers even if its diameter exceeds the maximum indicated above.
Assembling the DR DUAL-ACTION 3 PT HITCH LOG SPLITTER
Tools and Supplies Needed:
Two 3/4" Wrenches
Two 9/16" Wrenches
Two 1/2" Wrenches
17mm Wrench
Jack Stands
Wire Cutters
Safety Glasses
1. Open the Parts Box and lay them out on a clean flat area (Figure 2).
Note: For assembly location, the part numbers in the following list can be referenced to the Parts List and illustrations in Chapter 6.
Parts Supplied in Parts Box (
Figure 2):
Item # Part
# Description
Qty
1 ............. 29361 .............. Brace, Cross .................................................... 1
2 ............. 24537 .............. Hitch Pin 3/4" X 6" ......................................... 1
3 ............. 27610 .............. Abrasion Resistant Sheathing, 15.5in ............ 1
4 ............. 24538 .............. Linch Pin, 3/16" X 1-9/16" ............................. 3
5 ............. 15043 .............. Bolt, HHCS, 3/8-16 X 1-1/4", GR5 ................. 10
6 ............. 11241 .............. Washer, Flat, 5/16 USS, ZP ........................... 28
7 ............. 11075 .............. Nut, Nylon Lock, 3/8-16, ZP .......................... 10
8 ............. 11076 .............. Nut, Nylon Lock, 5/16-18, ZP ........................ 6
9 ............. 11158 .............. Bolt, HCS, 5/16-18 X 1", ZP ........................... 6
10 ........... 29379 .............. Tube Clamp, 3/4", Vinyl Coated .................... 4
11 ........... 15192 .............. Pin, Hitch Clip 5/16" - 3/8" ............................ 4
12 ........... 11214 .............. Cable Tie, 7-1/2 Long ..................................... 2
Compare the contents of the Parts Box with the “Parts Supplied” list above. If
you have any questions please contact us at www.DRpower.com or call 1-800-
DR-OWNER (376-9637) for assistance.
12
1
Figure 2
2
3
6
5
8
9
10
4
11
7
6