DR Power Dual Action 3 pt. Hitch Model (Aug 2011 - Present) - Manual (Page 20)

7 5 M E I G S R O A D , P . O . B O X 2 5 , V E R G E N N E S , V E R M O N T 0 5 4 9 1
©2013 Country Home Products, Inc. All rights reserved 276161A
Daily Checklist for the DR 3 PT HITCH LOG SPLITTER
To help maintain your DR 3 PT HITCH LOG SPLITTER for optimum performance, we recommend you follow this checklist
each time you use your Log Splitter.
[ ] Check the general condition of the Log Splitter, e.g.; nuts, bolts, welds, etc.
[ ] Check hydraulic fluid level in your Tractor and fill as needed.
[ ] Check hydraulic Hoses for cracks or wear.
[ ] Check the Frame for wear and damage.
[ ] Check the Wedge for tightness, nicks and wear.
End of Season and Storage

Check the Wedge for nicks and wear. Sharpen if needed.

Clean the exterior of the unit to remove all dirt, grease, and any other foreign material. To prevent rust, touch up painted surfaces
that have been scratched or chipped.

Be sure all nuts, bolts, and screws are securely fastened.

If possible, store the Log Splitter in a dry, protected place. If it is necessary to store the Log Splitter outside, cover it with a
protective material.
Before performing any maintenance procedure or inspection, stop the tractor and remove the key, wait five (5) minutes to allow all
parts to cool.
Before performing any maintenance procedure or inspection, stop the tractor and remove the key, wait five (5) minutes to allow all
parts to cool.