Specifications, Receptacles – DR Power 6000-Watt Generator User Manual
Page 24
![background image](https://www.manualsdir.com/files/781784/content/doc024.png)
20 DR
®
GENERATOR ATTACHMENT
Specifications
Length 26-1/2"
Width 16-1/2"
Height 31"
Weight 90
lbs.
AC Output:
Rated Voltage
125/250 VAC
Rated Frequency
60 Hz
Rated Current
40/25 Amps
Rated Output (continuous)
4.8 – 5.5 Kilowatts
Maximum Output
6.0 Kilowatts
Receptacles
•
The DR GENERATOR ATTACHMENT is equipped with two (2) 125VAC, 20 AMP, Duplex, Ground Fault
Circuit Interrupter (GFCI) Receptacles. Use each receptacle to operate 125VAC, single-phase, 60 Hz electrical
loads requiring up to 2,400 Watts (2.4 KW). Each duplex outlet is protected against overload with a push-to-
reset circuit breaker (Figure 30).
•
The DR GENERATOR ATTACHMENT is also equipped with a 125/250VAC, 25 AMP, Locking Receptacle. Use
this receptacle to operate 125/250VAC, single-phase, 60 Hz electrical loads requiring up to 6,000 Watts (6.0
KW) at 25 AMPS for 125 or 250VAC. Use only a NEMA L14-30 plug (Figure 31) with a 4-wire cord set rated for
250VAC loads at 30 AMPS or greater (Figure 31). The same 4-four wire cord can also be used to operate a
125VAC appliance having this type of connector. This outlet is also protected against overload with a circuit
breaker (Figure 30).
Figure 31
USE ONLY EXTENSION CORD SETS THAT ARE RATED FOR 125 VAC LOADS AT 20 AMPS OR GREATER.