DR Power 42 Lawn Mower Deck User Manual

Page 13

3. You can make further adjustments front to back by adjusting the Front

Brackets (Figure 20). Each adjacent hole will alter the deck height by 1/4"
front to back if you move both Front Brackets at the same.

Leveling the Deck Side to Side

4. Measure the distance from the ground to the bottom of the Deck Edge

Flange on the left and right sides of the Deck (Figure 18, on previous page).

5. Using a 3/16" Allen Wrench, adjust the Deck on each side as needed by

moving the Mounting Bolt to a different hole in the Front Bracket. Each
Hole in the Front Bracket will change the Deck height on that side by 1/4".

1/4"
Adjustment

Deck

Front

Adjustment

Brackets

Figure 20