DNF Controls ST60-S - Manual (Page 5)

5 ST60-S VTR Controller
JOG MODE
Press and hold the [REWIND] or [FAST FORWARD] switch to increase tape
speed to 3 times play speed.
Release the switch and the tape stops.
To exit JOG mode, press the [JOG] switch. LED #6, the JOG mode indicator,
will turn off.
RECORD MODE
Four (4) Record modes are available:
Crash Record (full record), Assemble Record, Insert Record and Record Lockout.
Press only the [RECORD] switch to activate the desired Record mode.
The Record Status Indicator will turn on.
Note that the VTR will not go into record if “Record Inhibit” is enabled on the
VTR or tape cassette.
RECORD SELECTOR SWITCHES
MODE S1 S2 S3 S4 S5 S6
Record Lockout ON OFF OFF OFF OFF OFF
Crash Record OFF OFF OFF OFF OFF ON
Assemble Mode OFF OFF OFF OFF OFF OFF
Insert Mode ON VID AUD1 AUD2 AUD3 AUD4
(active ON)
NOTE: AUD3 & AUD4 should be ONLY on VTRs that support 4 channels
of audio. For example: D1, D2 and D3 type VTRs.