DNF Controls 4000CL-MAV - Manual (Page 4)

4 4000CL-MAV, 250 Clip Fast Access System, for Sony MAV-555
Getting Started . . .
2. SYSTEM DESCRIPTION
‰ Instantly load a video clip at the press of a button.
‰ Instantly load a FILL clip & KEY clip at the press of ONE button, then play out both channels
in sync. LOOP up to 4 channels.
‰ Control up to 4 video channels individually or ganged.
DEFINITIONS
‰ Throughout this document, “Video Server” refers to the MAV-555.
‰ The ST300-S/SM as the ST300.
‰ Words surrounded by brackets, for example, [ENTER], are keys on the ST300.
[XXX] + [XXX] means hold the two keys down simultaneously.
‰ “Softkeys” are the row of keys directly below the display that perform multiple functions in
MENU and other modes.
3. SYSTEM INSTALLATION
ST300-S/SM, VTR/DDR CONTROLLER
a) Plug one end of a 9-conductor, RS422 serial cable into the 9-pin connector
(VTR 1, 2, 3 or 4) on the rear of the ST300. Plug the other end of the cable into the 9-pin
REMOTE connector on the Video Server.
b) Connect the +5, +12, -12 VDC POWER SUPPLY into the POWER connector on the rear
of the ST300. Plug the Power Supply into an outlet, 90 VAC to 240 VAC.
c) Check SETUP MENU prior to using the ST300 to confirm proper Record mode and other
User settable modes.