DNF Controls 3040P-O-MS User Manual
Page 13

13
3040P-O-MS Playlist Playout System, Odetics Protocol for MediaStream
[IN]
Sets the current location on the SOURCE as the IN point.
[SHIFT] + [IN]
Manually enter the IN point using a numeric keypad.
[OUT]
Sets the current location on the SOURCE as the OUT point.
[SHIFT] + [OUT]
Manually enter the OUT point using a numeric keypad.
[DEST]
Select
VTR
[1], [2], [3], [4] or [5] for the record location.
[TIME]
Press softkey to select mode: Tape time (TM), VITC (VT) or Time
Code (TC).
[CAPTURE]
After entering the IN, OUT and DESTINATION information,
press this softkey. The screen shown above will be displayed; enter the
CLIP ID (maximum of 8 characters).
When [ENTER] is pressed, the SOURCE VTR will go to the
PREROLL VALUE that has been assigned and the DESTINATION
VTR (on the Video Server) will go into record.
NOTE: If a Playlist is loaded when trying to CAPTURE, a warning message to unload lists will
be displayed.