Digi-Star EZ 320 - Manual (Page 7)

MODEL 320 - System Operation:
5
Using the Pre-Alarm: Step 3) Use the numeric keypad to select a
The Pre-Alarm feature is an "early warning"
for the preset. For example, if the Pre-Alarm is
set to 100 and the preset is 1000, the preset
alarms flash during the last 100 lbs/kgs of
thepreset. The alarms are continuous once the
preset is active. This allows more accuracy in
reaching the preset.
Changing Pre-Alarm Weight:
Step 1) Press and hold the [NET/GROSS] key,
then press the [ON] key. Continue holding
both keys until the indicator beeps and
displays the message " P-ALM". The 'CAL'
annunciator flashes and the current Pre-Alarm
weight is displayed.
Step 2) Press the [CLEAR] key to erase the
current weight value.
Pre-Alarm weight.
Step 4) Press the [ON] key. The display will
advance to the next setup value.
Step 5) To exit setup and return to weighing,
press and hold the [TARE] key, then press the
[ON] key.